User guide
Doortello Business
Issue 1.00
Page 20
The dial pad can be use to dial telephone numbers and/or speed dial codes. This
function is free programmable (read also
Chime buttons and functional keys
programmation
). If needed you can use also both functions programming the
functional buttons on the dial pad or chime button modules. If you select the speed
dial function you can enter a two digits long code on the dial pad. This code will
then dial a up to 16 digits long stored telephone number on the telephone line.
The speed dial codes can be 00 tp 99, this means that you have up to 100 speed dial
locations available.
As digits inside a telephone number you can use all numbers from 1 to 0, as well
the special codes * , # and the functions „flash“ and pause. From factory no
numbers are programmed in the speed dial locations.
To program the speed dial numbers follow this procedure:
OK tone
{telephone number}
{speed dial code}
OK tone
As digit for the telephone number (max 16 digit for each telephone number) the
following values can be entered:
Digits:
,
,
,
,
,
,
,
,
,
;
Special dial functions:
, will dial the code
(is considered as 1
digit);
, will dial the code
(is considered as 1
digit);
, will make a dial pause of 2 seconds (default
value) duration (is considered as 1 digit);
, will send a „Flash“ (short line interruption,
„Recall“ button) of 80 ms (default value)
duration (is considered as 1 digit);
Codes: from
to
Example:
The speed dial code 65 must dial the telephone number 66000.
As your PBX
does not have an automatic trunk selection feature activated you must dial a 0 to
size the trunk. To ensure the correct dial after the trunk sizing a pause has to be
inserted. Programmation:
Speed dial numbers
