User guide
Doortello Business
Issue 1.00
Page 17
If you have to move the door phone, to change the complete programmation or
the unit was programmed wrong you can load the factory default data using the
following procedure:
OK tone
OK tone
Please take care that the default data load will delete all programmed telephone
numbers and values. If you want to delete or change just one telephone number is
the default data reload not very useful. Use instead the procedure described in the
chapter
Delete telephone number and functional keys
.
Please note!
The above indicated procedure considers that the password has his standard
value
. If the password was changed you have to use the new
password instead of
.
Please note!
The default data are loaded only after the input of the digit
to terminate
the programming mode
.
Please note!
If the password has been lost it is possible the load the default data using a
master password. In this case the factory default data a reloaded as well the
standard password. Please contact Rocom Energie- und Kommunikations-
systeme GmbH for more details.
Default data load
Chime buttons and functional keys
Each of the 127 chime buttons and the 4 functional keys on the dial pad can be
programmed to dial a telephone number with up to 16 digits. Also special
functions can be assigned to the buttons, and sometime also special functions
together with a telephone number can be programmed.
The single chime buttons have a decimal address from 001 to 127. This address is
defined by the DIP switch you can find on the single modules (see also
Cabling of
the chime buttons
for more details and the user guides for the chime button
modules and the encoder units). The four functional keys on the dial pad have a
fixed address: 128 („handset“), 129 („key“), 130 („name“) und 131 („lamp“).
As digits inside a telephone number you can use all numbers from 1 to 0, as well
the special codes * , # and the functions „flash“ and pause.
From factory no numbers or functions are programmed for the buttons. Only the
functional key 128 („Handset“) has the function
„Dial pad
