Rocom Doortello Business FW T2.05W2.04 User Manual Download Page 22

Page: 22 / 60

User guide

Doortello Business

Issue 1.00

Page 22

Loudspeaker status after line seizure

With the Doortello Business it is possible to define which status the loudspeaker

has to have after the line seizure. You can define if it has to be on or off. Form

factory the loudspeaker is always on, but can modify this, i.e. if you don’t want to

hear the dial and call progress tones. You can choices between 5 different

operating methods:

Loudspeaker always on
The loudspeaker is on as soon you press a button. All dial and call progress tone

can be heard. The loudspeaker is switched by the speakerphone using the half- or

full duplex modality as programmed. (Default)

Loudspeaker always on with manual switch activated
The loudspeaker is on as soon you press a button. All dial and call progress tone

can be heard. The loudspeaker is switched by the speakerphone using the half- or

full duplex modality as programmed. Using the DTMF digit

the loudspeaker

can be manually activated (manual switched speakerphone). Using the digit
the speakerphone is switched back in the programmed automatic modality.

Loudspeaker off until call answer
The loudspeaker is off after pressing a button. All dial and call progress tone can

not be hearted. As soon as the called party answers the call (speech detection) the

loudspeaker is switched on. Afterwards the loudspeaker is switched by the

speakerphone using the half- or full duplex modality as programmed.

Loudspeaker off until manual activation
The loudspeaker is off after pressing a button. All dial and call progress tone can

not be hearted. Dialling the digit

after call answer the loudspeaker is

manually activated. Afterward using the digit

the speakerphone is switched

on manually, and with the digit

the speakerphone is switched back in the

programmed automatic modality.

Loudspeaker always off
The loudspeaker is always off. This status is used for testing purposes only.

Please note!

The deactivation of the automatic call answer feature can be programmed

ONLY if an EXTERNAL POWER SUPPLY is provided. If the device is only line

powered this programmation will be USELESS as the device will ALWAYS

answer the call.

Summary of Contents for Doortello Business FW T2.05W2.04





























































Search results

Summary of Contents for Doortello Business FW T2.05W2.04

Reviews:

Related manuals for Doortello Business FW T2.05W2.04

Brands by name

Popular brands

Rocom Doortello Business FW T2.05W2.04, User Manual

Search results

Summary of Contents for Doortello Business FW T2.05W2.04

Reviews:

Related manuals for Doortello Business FW T2.05W2.04

Brands by name

Popular brands