Industrial 18.1" Flat Panel Monitor
17
Publication 6185-UM001B-EN-P
The Versa mount (6185-V) monitor is designed to be mounted using
VESA FPMPMI 100 mm arm or yoke mounting hardware.
The arm attachment allows you to mount the monitor on a horizontal or a
vertical surface, and provides the flexibility to swing the monitor out of
the way in tight areas or to reposition it as the operator moves around the
workspace.
The yoke bracket assembly allows you to tilt and swivel the monitor to
adjust it for optimal viewing.
Tools Needed
You will need a medium Phillips screwdriver for this procedure.
Versa Mount Mounting Guidelines (6185-V)
Observe the following precautions when installing this unit on an arm or
in a yoke:
•
Ensure that the surface you are mounting the unit on is sturdy enough
to support it. The monitor alone weighs approximately 14.0 lb.
(6.4 kg). The weight of the entire unit is the monitor weight plus the
mounting hardware weight.
•
Ensure that the mounting arm used is strong enough to support the
unit. The arm should meet VESA FPMPMI 100 mm standards.
•
Select a location for mounting that provides clearance for mounting
and positioning the adjustable unit as well as routing all cables. See
Figures 10-13 below.
Versa Mount (6185-V)
Summary of Contents for 6185-D
Page 63: ......
