Robur GAHP Line AR Series, Installation, Use And Maintenance Manual

Page: 14 / 100

GAHP-AR – Installation, start-up, use and maintenance manual
10
Edition: 2014-08
BURNER SPECIFICATIONS
GAS INPUT (HHV) kBtu/hr 95.5
ELECTRICAL RATINGS
REQUIRED VOLTAGE, 60 HZ, SINGLE PHASE
(2)
V 208 - 230
MINIMUM CIRCUIT AMPACITY (MCA) Unit only A 8.0
MAXIMUM OVER CURRENT PROTECTION (MOCP) A 10.9
TOTAL ELECTRICAL OPERATING CONSUMPTION (NOMINAL)
(3)
kW 0.75
PHYSICAL DATA
SHIPPING WEIGHT Pounds 883
OPERATING WEIGHT Pounds 838
UNIT WATER VOLUME
(4)
Gallons 0.79
DIMENSIONS
(5)
WIDTH
LENGTH
HEIGHT Inches
33
1
/
2
48
1
/
2
57
WATER CONNECTIONS (INLET / OUTLET) FPT 1” 1/4
GAS INLET CONNECTION FPT
1
/
2
HEATER GASES DUCT INTERNAL DIAMETER Inches 3
1
/
8
Table 4 - GAHP-AR technical data
(2) UNITS ARE FACTORY-WIRED FOR 208-230 VOLTS OPERATION.
(3) MAY VARY BY ±10% AS A FUNCTION OF BOTH POWER SUPPLY AND ELECTRICAL MOTOR INPUT TOLERANCE.
(4) REFERRED TO A SOLUTION OF QUALITY TAP WATER AND 10% BY VOLUME OF INHIBITED PERMANENT ANTIFREEZE. HIGHER
ANTIFREEZE CONCENTRATIONS MAY BE REQUIRED IN CERTAIN APPLICATIONS. MONO-ETHYLENE GLYCOL CAUSES
CORROSION PHENOMENON IN GALVANIZED METAL PIPES.
(5) FOR GASES DUCT DIMENSIONS SEE FIGURE 3, PAGE 14.