Robot Coupe Blixer 23 a, Manual

Page: 11 / 75

32
• SAFETY INDICATOR LIGHTS:
For the dual-speed models:
Two green lights indicate that the machine is ready
to use.
For the variable-speed R 30 V.V. and R 45 V.V.
models:
One green light indicates that the machine is ready
to use in the direction that is indicated.
For all models:
-
Orange light:
the machine is powered up, but the
safety criteria have not all been met. The screen
will display a troubleshooting message (see table
on page 41).
- No lights : the machine is either not powered up,
has the wrong power supply, or has broken down.
- Red light:
The machine’s motor has reached
a temperature of 120 °C.
The motor will shortly cut out.
This light allows you to anticipate
the machine switching itself off
in the middle of a processing
task.
Wait for the red light to go out before embarking
on a fresh task.
The red and orange lights will
remain on until the motor has
cooled down.
You must wait until the red and
orange lights have gone out
and the green light has come
on before switching the
machine back on.
1
PRECAUTIONS FOR USE
• EMPTYING THE BOWL
1) Open the lid by
freeing the locking
handle. Release the til-
ting lever by raising it.
2) Then tilt the bowl to
your left, keeping hold
of the handle on the
right.
3) Empty the bowl once
it is in the tilted position.
It is advisable to remove
the blade assembly
before tilting the bowl,
especially when proces-
sing liquid preparations.
2
+ + =
= +
- Standby
If the machine is left powered up but unused for
between 15 and 120 minutes, without any
movement of any of its electrical elements (safety
switch, "OFF" button, etc.), the green lights will go
out and the orange light will start to flash.
To quit standby:
- Extended standby
If the machine is left powered up but unused for
more than 2 hours, without any movement of any of
its electrical elements (safety switch, “OFF” button,
etc.), the green lights will go out and the orange
light will start to flash.
To quit extended standby:
or
or
or
or
VCM - BLIXER An:VCM - BLIXER 10/01/13 10:05 Page 32