Robot Coupe Blixer 23 a, Manual

Page: 14 / 75

35
2-BLADE ASSEMBLY :
We recommend you use the 2-blade assembly for processing small quan-
tities of up to half the maximum limit indicated (see page 33), with the
exception of liquid or blended preparations.
3-BLADE ASSEMBLY :
We recommend you use the 3-blade assembly for processing large quantities of
more than half the maximum limit indicated, with the exception of liquid or blended
preparations for which we strongly recommend you use the 2-blade assembly.
To obtain the best possible results with these types of preparation, we recommend
you use the lower speed (1500 rpm) only.
POSITION 1 : With spacer between lower blade and blade shaft.
• For
coarse chopping .
FITTING :
• Fit the blades and spacers so that they are the right distance apart,
according to the :
- type
- weight and
- volume of the foodstuffs to be processed.
POSITION 2 : No spacer between lower blade and blade shaft.
• For
fine chopping and emulsions.
• For
grinding
and
kneading
.
DISMANTLING : • Unscrew the screw nut
• Remove the spacers.
Eng
• VERTICAL CUTTER-MIXER ONLY
Position 1 Position 2
Correct positioning of
2-blade assembly
180°
Position 1 Position 2
Correct positioning of
3-blade assembly
120°
120°
Screw nut Wide spacer Narrow spacer Blade Locking spacer Blade shaft
VCM - BLIXER An:VCM - BLIXER 10/01/13 10:07 Page 35