RS-Box User Manual
Notes:
1. LAN
：
With switch which is connected to the RS-LiDAR and the user receivers connected
to the network, the LAN port can receive the RS-LiDAR-16 point cloud data and send the
RS-LiDAR-Algorithms perception results.
2. DC: The input voltage. Please use the original power adapter.
3. Power: RS-Box boot-up button.
4. Guidelines
Note: The configuration of the RS-Box has been set up within the factory, please do
not modify system configuration without technicians.
Procedures:
Devices Connection:
Use a SWITCH to connect the RS-LiDAR, RS-Box, and the
Receiver computer (Recommend to use Ubuntu computer with ROS system). Boot
up the RS-Box with a push on the Power button. Device connection as follows:
Figure 2 RS-Box Connecting Diagram
