RS-Box User Manual
Click on the left to activate with a push of a button or set the home page as the default
interface to launch the perception interface. On the right side, there is a button that can also
be used to activate the 16 channel LiDAR perception. The black square below the button is
the area where the perception information will be printed. When the perception is activated,
the perception operation information will be printed in this area.
(2) Static Parameters Alteration.
For first time using LiDAR or replacing LiDAR, the static parameter file needs to be
replaced. The static parameter file is in the configuration_data folder under the LiDAR
supporting U disk. Steps are as follows:
Step 1. Select the replacement static parameter file among the list on the left of the WEB
console;
Step 2.Click “Click to select file” on the right to select the static parameter file. After
confirmation, the static parameter file to be uploaded will be displayed under the upload
button;
Step 3. Click the“Upload” button to upload the file.
(3) Update SDK
For more and better user experience, this module provides updates below system level. The
replacement steps are as follows:
Step 1. Select the update SDK in the list on the left of the WEB console.
Step 2. Click the "Click to select file" button on the right, select the new SDK compression
package, after confirmation, the compressed package to be updated will be displayed under
the “update” button.
Step 3. Click the “update” button to update.
(4) RS-Box Console.
RS-Box Console is a Web version of remote-control terminal, user can control RS-Box
through the terminal directly.
(5) Parameter File Replacement.
