RS-Box User Manual
1. Safety Tips
To reduce the risk of damage and to avoid violating the warranty terms, please
do not dismantle or assemble RS-Box, please do not make any change or extra
operation on the pre-installed systems or on the RS-LiDAR-Algorithms related
programs other than what has been described in this Manual.
Reading - Please read the operating instructions and safety tips carefully before using
the product.
Following - Please follow all the operating instructions and safety tips given in this
Manual.
Retaining - Please retain the operating instructions and safety tips for future reference.
Warning- Please observe all safety instructions and warnings attached to avoid
accidents.
Servicing-Please do not attempt to service the product other than what has been
described in this Manual. For servicing, please contact RoboSense.
2. Product Introduction
RS-Box is a plug-and-play LiDAR algorithm hardware platform introduced by
RoboSense. Developed in compliance with mechanisms of RS-LiDAR,
RS-Box has RS-LiDAR-Algorithms which require no complicated
configuration processes. Coordinating with RS-LiDAR, users can in no speed,
seamlessly integrate LiDAR perception modules to their autonomous driving
architecture, realizing the dream of attaining autonomous driving LiDAR
environment perception capability with just a push of a button.
Activated by with single key on Web, the RS-Box will then transmit perception
data on obstacles identification, classification and moving objects tracking
through LAN. RS-Box is embedded with RS-LiDAR data receiving,
translating, and processing algorithms, thus users can easily integrate the data
into their autonomous driving system without concerns on the perception data
processing.
(To have good test results, please test RS-Box in an outdoor
environment. Recommended installation height of RS-LiDAR is 1.2-2m).
