16
Instructions for Use
Spot Cleaning
In Standby or Pause mode, press and hold the button to
start spot cleaning. This mode is used to clean a 1.5m × 1.5m
square area centered on the robot. After cleanup, the robot
will return to the center of the square.
Selective Room Cleaning
Select specific rooms for cleaning in the app. In this mode,
the robot will only clean the selected rooms.
1.5m
1.5m
Note:
Starting spot cleaning in pause mode will stop the current cleaning cycle.
Note:
• A full map must be created and Map Saving mode switched on before this function
can be used.
• After cleaning starts, the robot may move beyond the defined areas. Make sure
there are no obstacles preventing the robot's access to the target rooms.
Scheduled Cleaning
Use the app to set start times for scheduled cleanups.
The robot will return to the charging dock after each
cleanup.
Zone Cleaning
Use the app to draw a specific zone for the robot to clean.
Note:
While cleaning the designated zone, the robot may move outside zone borders. Make
sure that there are no cables or obstacles placed close to the cleanup zone.
Summary of Contents for S6 Pure
Page 2: ......
Page 3: ...Languages Index ...