Roborock S6 Pure, User Manual

Page: 17 / 37

13
Installation
Using the robot
6. Mopping
Note:
• It is recommended that all floors are vacuumed at least three times before the first
mopping session to reduce excessive dirt buildup on the mop.
• Use barrier tape to prevent mopping carpeted areas, or remove carpets prior to
mopping.
• To prevent corrosion or damage, do not use cleaning fluid or disinfectant in the
water tank.
• Cleaning the mop cloth every 60 minutes is recommended to ensure the water
flow rate and cleaning effect.
Adjust flow rate
Toggle the switch to adjust the flow rate according to your
needs.
Low
High
Fill the water tank
Open the water tank, fill it with water, and close it tightly.
Install the mop cloth
Dampen the mop cloth and squeeze it until it stops dripping.
Insert it into the mounting slot in the water tank.
Install the module
Slide the mop module in line with the alignment marks on
the rear of the machine until you hear a "click".