z
Do not insert a finger or object in the openings in the product. It may cause fire, electric shock or injury.
z
Do not bring a floppy disk or other magnetic media within one meter of the product. The magnetic field
generated by the magnet may destroy the data in the floppy disk, etc.
z
Do not step on the product, use it as a footstool or place any object on it. It may cause scoring, dents or
deformation of the driving part, resulting in product damage, unintended stopping due to damage, or
performance drop.
[Maintenance, Inspection, Repair]
z
Wear protective goggles when applying grease to the actuator. Failure to do so may result in eye
inflammation due to spattered grease.
Caution on Use
z
Never perform push-motion operation, as it will cause the magnetic coupling to lose alignment.
z
This product cannot be installed vertically or on its side.
Note
[Installation]
z
Protection covers or other guards must be provided for the moving parts of the equipment to avoid
direct contact with the operators.
z
The following conditions must be met in order to improve the straightness of the table movement and
ensure the smooth movement of the ball screw and linear guides:
1.
Flatness of the mounting surface must be within 0.05 mm.
2.
The mounting surface area must be large enough to ensure the rigidity of the actuator.
[Installation, Operation, Maintenance]
z
When handling the product, wear protective gloves, protective goggles, safety shoes or other necessary
gear to ensure safety.
[Maintenance, Inspection, Repair]
z
When adding grease, use the specified brand. In particular, pay attention not to mix fluorine grease and
lithium grease, as it may cause damage to the product due to poor lubrication, increased resistance,
etc.
[Disposal]
z
When the product becomes no longer usable or necessary, dispose of it properly as an industrial waste.
Others
IAI shall not be liable whatsoever for any loss or damage arising from a failure to observe the
items specified in “Safety Precautions.”
Summary of Contents for RCP2W
Page 8: ......
