24
Layers/ Perimeters
Layer Height
:
Sets the height of each layer of the print. A smaller number will create
more layers and more vertical accuracy but also a slower print. Range = .05mm-.3mm
First layer height
:
Sets the height of the first layer. It is often desirable to print a taller first layer to ensure
a good solid adhesion to the build plate. Max .04mm
Bottom Clip:
Use this if your part has an uneven bottom surface, this will cut the entered amount off
of the bottom of the print. Default= 0
Avoid Crossing Perimeters:
Minimizes the number of times the extruder crosses an external perimeter.
Perimeters:
The number of external layers or shells to create. This determines how many layers thick
your part walls will be. More perimeters make for a stronger outer surface of your part.
Spiral Vase:
This setting will force the print to have only one perimeter and gradually increase the
extruder height during the print. Only one part can be printed at a time with this feature.
This is a quick way to make your parts hollow. Default=unchecked.
Top Layer:
How many layers will be solid filled on the top surfaces of the object. If you want the top
of a part to be open set to 0. A good rule of thumb is to make enough top layers to equal
the thickness of side walls. Default=3.
Bottom Layer:
How many layers will be solid filled on the bottom surfaces of the object.
Recommended= 3.
Infill
Fill density:
The ratio of material to empty space ranged 0-1. Zero would be no infill; 1 would be solid
infill. A higher value here will make a part stronger, yet take more time to complete.
Infill Type:
The type of support to create inside of part. Select from lines, grid (squares), concentric
(circles), or triangles. Default=Grid
Speed
Speed for Print Moves:
