23
the
button. This will add a short description underneath every setting that is available. We
will leave this unchecked for now.
*
We have icluded a preset controls option in our version of Mattercontrol. With this you can create
custom presets for any of the settings we are about to cover. Your software comes preloaded with high,
medium and low quality settings as well as PLA and ABS material settings. We will cover how to
configure custom settings for these later on.
Now you can navigate through your slice settings. We will walk you through each of them
below:
PRINT SETTINGS:
Underneath the Slice Engine Drop down list, Click the
tab and you will see a handful of
settings drop down underneath it.
Make sure that your Quality and Material selectors are set to default. (5.2a)
(5.2a)
