Roberts Stream 63I Page 98 Manual Download

Page: 98 / 124

Setting the alarm clock - cont.

6. Press

the

Menu Up

Down

buttons to highlight

'Enable'

and press

the

Select

button. The display will show the Frequency options for the

alarm. The alarm frequency options are as follows:

'Off'

- the alarm will be disabled

'Daily'

- the alarm will sound everyday

'Once'

- the alarm will sound once

'Weekends'

- the alarm will sound only at weekends

'Weekdays'

- the alarm will sound on weekdays only

Press

the

Menu Up

Down

buttons to choose the required alarm

frequency option. Choosing Off will disable the alarm. Press the

Select

button

to conﬁ rm the selection.

If you choose to set the alarm to Once you will also need to set the date
using the

Menu Up

Down

and

Select

buttons.

7. The alarm can be set to buzzer, Internet radio, DAB radio, FM radio,

Last.fm, CD, USB, SD and iPod. For whichever radio mode is selected,
the radio alarm may be set to any of the stations which have been stored
as presets or to the station most recently listened to.

Press

the

Menu Up

Down

buttons to highlight the current

'Mode'

option for the alarm, then press the

Select

button if you wish to change

it.

Press

the

Menu Up

Down

buttons

to highlight either

'Buzzer'

or the

required mode. Press the

Select

button to conﬁ rm the selection.

8. If setting the alarm to a radio option, Press the

Menu Up

Down

buttons

to highlight the

'Preset:'

option then press the

Select

button if you wish

to change it.

Choose from either the radio station

'Last listened'

to, or from the presets

1 - 10. Scroll to the chosen option and press the

Select

button to conﬁ rm

the selection. Note that you can only set the alarm to use a preset which
has already been stored.

6-8

Summary of Contents for Stream 63I





























































































































Search results

Summary of Contents for Stream 63I

Reviews:

Related manuals for Stream 63I

Brands by name

Popular brands

Roberts Stream 63I, Manual

Search results

Summary of Contents for Stream 63I

Reviews:

Related manuals for Stream 63I

Brands by name

Popular brands