manualshive.com logo in svg

Roberts Stream 63I, Manual, Page: 76 / 124

Share
Download
Roberts Stream 63I Manual Download Page 76

75

CD track programming

In addition to playing of complete CDs, selected tracks, or a random 
selection, the CD player allows you to programme a sequence of up to 
20 tracks to be played in whatever order you choose.

1.  With the unit in CD mode and with a CD inserted, make sure that the 

CD is stopped (press the 

Stop 

button).

2.  To enter programming mode, press the 

Auto 

button (on the remote 

control).

3.  Choose the fi rst track using the 

Fast-forward

 or 

Rewind 

buttons. 

4. Press the 

Auto 

button to enter the selected track into the 

programme.  

5.  Choose another track using the 

Fast-forward

 or 

Rewind 

buttons, 

and enter it into the programme using the 

Auto 

button (track 10 in 

example shown).

6.  Repeat step 5 to store as many as 20 tracks in the programme.

7.  When the programme is complete, press the 

Play / Pause 

button to 

start playing. The tracks will then be played in the order that you have 
just programmed.

8. Pressing 

the 

Stop 

button, or switching to another operating mode will 

erase the programme.

Note:  If you are programming the tracks using a CD with MP3 or WMA 
fi les in folders (see the following pages), you can also use the 

Up 

or 

Down

 

Folder 

buttons to specify the folder in steps 3 and 5 above.

1,8

3,5

3,5

2-5

7

Summary of Contents for Stream 63I





























































































































Reviews:

No comments