If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
20
Confi guration
Manual network confi guration - cont.
5. In most installations the DNS settings (DNS = Domain Name Server) will be set to the same IP address
as your router. In this case the secondary DNS may be left at zero.
To enter the DNS address, press the
Menu Up
or
Down
buttons to set the value for each group of digits
and then press the
Select
button or the
Left
or
Right
buttons (on the remote control) to enter the value
and to move on to the next group. Repeat this until all eight groups of digits have been entered.
If you previously specifi ed
'Wired'
and then
'DHCP disable'
, your radio should now connect to the router
using the Ethernet cable (in which case skip to step 11).
6. If you specifi ed
'Wireless'
, the next step is to set up the WiFi connection, starting with the name of the
wireless network (SSID) followed by the encryption options and password.
To enter the SSID, characters are selected and entered using the
Menu Up
or
Down, Left
or
Right
(on the remote control)
and
Select
buttons. The radio scrolls through the available characters as well
as the three controls on the right. The character currently highlighted will be entered when you press
the
Select
button.
Do this as needed until the complete network name has been entered.
The SSID setting is sensitive to
upper and lower case characters and symbols. You must enter it exactly as set up in your router.
The three controls on the right-hand side of the screen have special functions. You can quickly access these
by pressing the
Info
button and then use the
Menu Up
or
Down
and
Select
buttons as needed:
select
'
' to erase a character just entered (long press to clear);
Info
again to continue
select
'
' when the complete SSID has been entered
select
'
' to cancel and go back to the DNS settings screen
7. Having entered the SSID, you must enter details of the encryption system used on your wireless network.
This should be the same as specifi ed in your router settings. If your network does not use encryption,
then select the
'Open'
option. Your radio should then connect to the network, so skip to step 11. If your
network uses WEP (Wired Equivalent Privacy) select the
'Pre-Shared Key'
option then go to step 8.
The remaining options are for WPA or WPA2 (WiFi Protected Access) - see step 9.
8. If
you
chose
'Pre-Shared Key'
in step 7, you should then choose the WEP option. The key should be
entered using only the numbers
0-9
and the letters
A-F
. The key will be 10 characters long for 64-bit
encryption and 26 characters long for 128-bit encryption. The radio will accept lower-case letters
a-f
as
equivalent to upper-case
A-F
. Spaces or special symbols are not permitted in WEP keys.
