11
7-12
Plugging in and language selection - cont.
7. Your radio will ask whether the Setup Wizard should be run at the next
start up. The
'NO'
option will be highlighted.
Press
the
Tuning/Select
control to select the
'NO'
option.
8. Your radio will then display the Main Menu. Rotate the
Tuning/Select
control until
‘System settings’
is highlighted on the screen.
Press the Tuning/Select control to enter the System settings menu.
9. Rotate
the
Tuning/Select
control until
‘Language’
is highlighted on
the screen.
Press the Tuning/Select control to enter the Language options menu.
10. Rotate the
Tuning/Select
control until the desired language is
highlighted on the screen.
Press the Tuning/Select control to select the chosen language option.
The display will then change to show the System settings menu in the
chosen language.
11. Rotate the
Tuning/Select
control until the
‘Setup wizard’ option
is
highlighted on the screen and then press the control.
If you change the language you will not see
'Setup wizard'
in English.
You will see an equivalent menu item in your language - for example,
'Assistant réglages'
in French, or
'Inställningsguide'
in Swedish.
12. Rotate the
Tuning/Select
control until ‘
YES’
is highlighted on the
screen and press the control to select it.
This will cause the radio to run the set up procedure as if it had just
been switched on for the
fi
rst time, but it will do this using the language
selected in step 10, above.
13. Continue setting up your radio on the next page.
Summary of Contents for Stream 205
Page 102: ...101 Notes ...