7
Operating your radio FM
1. Turn on the radio by setting the
speaker/on/off switch
(4) to the
“On” position.
2. For FM stereo reception set the
waveband switch
(2) to the “FM
Stereo” position. When a station being received is in stereo the
stereo indicator will light.
•
If the FM signal becomes weak or is accompanied by a high level
of background hiss, you may select MONO mode by setting the
switch to the “FM” position.
3. Adjust
the
volume control
(1) to the desired level of sound.
Rotating the control anti-clockwise will increase the sound level.
4. Slowly rotate the
tuning control
(5) until the dial pointer corresponds
to the frequency of the desired station. On FM the tuning scale is
marked in Megahertz (MHz). The tuning indicator (6) will light up
when a station is correctly tuned. Note : the tuning indicator may
not light up when receiving a weak station or if the batteries are
low.
5. For FM reception fully extend the
earphone lead
and position for
best reception. When using the built in loudspeaker plug the
pig
tail aerial
into the earphone socket as described on page 3.
6. To switch off your radio slide the
speaker/on/off switch
(4) to the
“Off” position.
Note: Stereo is only available on FM and when using earphones.
