manualshive.com logo in svg

Roberts Blutune 60, User Manual, Page: 50 / 56

Share
Download
Roberts Blutune 60 User Manual Download Page 50

49

System reset

If your sound system fails to operate correctly, or some digits on the display 
are missing or incomplete carry out the following procedure.

1.   Press and release the 

On/Standby 

button to switch on the sound 

system. 

2.  Press and release the 

Mode

 button until the DAB or FM mode is 

selected. 

3.  Press and release the 

Menu 

button. The DAB or FM menu will show 

on the display.

4.  Press and release the 

Tuning Up

 or 

Down

 buttons until 

'SYSTEM'

 

shows on the display. Press and release the 

Select 

button.

5.  Press and release the 

Tuning Up

 or 

Down

 buttons until 

'RESET' 

shows on the display. Press and release the 

Select 

button.

6.  Press and release the 

Tuning Up

 or 

Down

 buttons until 

'Y' 

appears on 

the display. If you do not wish to carry out a system reset, highlight 

'N'

 

and then press and release the 

Select

 button. The display will revert 

to the previous display.

7. With

 'Y'

 displayed, press and release the 

Select

 button. A full reset 

will be performed. The station list and presets will be erased. Alarms 
will be cancelled and settings will be set to their default values.

8.  See 'Operating your radio' on page 7 for further details.

In the event of a malfunction due to electrostatic discharge, mains power 
supply transients or short interruptions, reset the product as above to 
resume normal operation. If you are not able to perform the reset operation 
as above, removal and reconnection of the power supply may be required.
If a problem persists our technical staff would be pleased to offer any 
assistance on operating the radio. Our technical helpline number is 
020 8758 0338.

4-6

4-6

4-7

3

2

Summary of Contents for Blutune 60

























































Reviews:

No comments