manualshive.com logo in svg

Roberts Blutune 60, User Manual, Page: 42 / 56

Share
Download
Roberts Blutune 60 User Manual Download Page 42

41

Cancelling alarms

1.  While an alarm is sounding press and release the 

On/Standby 

button 

to cancel the alarm.

When the alarm sounds

The alarm will sound at the selected times for up to 60 minutes unless cancelled. The maximum volume used for the radio alarm will be speci

fi

 ed 

during the alarm setting procedure. 
When your sound system is set to wake by the radio alarm, your radio will switch to the selected radio station. If the radio cannot connect to the speci

fi

 ed 

radio station, the buzzer will be used instead.

Note:

 If the radio is switched on because of a radio alarm you can control basic functions such as the volume control.

When the buzzer alarm activates it will start softly and gradually increase in level.
The alarm icon will 

fl

 ash on the screen and the sound system will automatically switch back to standby mode when the 60 minutes have elapsed.

Note:

 If using CD or USB as the source for the alarm, please ensure that suitable media is inserted in the sound system. If no CD or USB is detected 

the buzzer will be used instead.

Snooze function

1.  When the radio or buzzer alarm sounds, press and release the 

Snooze 

button. This will silence the alarm for 5 minutes.

 
 

When the Snooze button has been pressed during an alarm, the display 
will show the Snooze symbol 

. This sequence can be repeated 

during the 60 minute alarm period.

2.  To cancel the Snooze function, press and release the 

On/Standby 

button.

1

2

1

Summary of Contents for Blutune 60

























































Reviews:

No comments