manualshive.com logo in svg

Roberts Blutune 60, User Manual, Page: 29 / 56

Share
Download
Roberts Blutune 60 User Manual Download Page 29

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

28

Inserting a CD

Ensure the CD player is empty before inserting a disc. If there is a disc 
in the player then the CD loaded indicator will show on the display. If 
you cannot insert a disc, press the 

CD Eject 

button to remove the CD 

currently in the player.

1.  Insert a disc with printed side facing up into the CD slot. The disc will 

be loaded automatically. The unit will check the CD type and load its 
track list. The display will show 

'READING'

 as the information is read. 

 

Audio CD:

 The total number of tracks will then be displayed.

 

MP3/WMA CD:

 The total number of 

fi

 les and albums will then be 

displayed.

2.  To eject a CD press and release the 

CD

 

Eject 

button. To reload a CD 

that has just been ejected, press the 

Eject 

button a second time.

 
3.  To select the CD mode press the 

Mode 

button until 

'CD'

 shows on the 

the display.

Playing a CD

1.  The CD will play automatically 10 seconds after the CD has been 

inserted. Alternatively, press the 

Play/Pause 

button to start playing 

the disc. 

 

Audio CD: 

The display will show the current track number and the 

elapsed playing time.

 

MP3/WMA CD: 

The display will show the current 

fi

 le number and the 

elapsed playing time.

2. Adjust 

the 

Volume

 to the required setting.

3

2

1

CD

CD

CD

Summary of Contents for Blutune 60

























































Reviews:

No comments