manualshive.com logo in svg

Roberts Blutune 60, User Manual, Page: 13 / 56

Share
Download
Roberts Blutune 60 User Manual Download Page 13

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

12

Manual tuning - DAB

Manual tuning allows you to tune your radio to a particular DAB frequency 
in Band III. Any new stations found will be added to the station list. This 
function can also be used to assist the positioning of the aerial or the sound 
system to optimise reception for a speci

fi

 c channel or frequency. Note 

that UK DAB stations are located in the range of channels 11B to 12D.
 
1.  Press and release the 

Menu 

button. The DAB menu will show on the 

display. 

2.  Press and release the 

Tuning Up 

or

 Down

 buttons until the display 

shows 

'MANUAL'

. Press and release the 

Select

 button to enter the 

manual tune mode.

3.  Press and release the 

Tuning Up 

or

 Down

 buttons to select the 

desired DAB channel. 

4.  Press and release the 

Select 

button

 

to tune to the chosen frequency. 

5.  If a signal is present, this will be indicated on a signal strength display. 

The minimum signal marker ( ) shows the minimum signal strength 
needed for good DAB reception. The signal indicator chevrons go 
up or down showing the changing signal strength as you adjust the 
telescopic aerial or your sound systems position. Press and release 
the 

Select 

button again to return to the normal DAB tuning mode.

2,3

2,3

1

2-5

Summary of Contents for Blutune 60

























































Reviews:

No comments