
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
16
Manual tuning - FM
1. Fully extend the telescopic aerial located on the rear of your sound
system. The aerial should be fully extended and positioned vertically
for optimum reception.
2. Press and release the
On/Standby
button to switch on your sound
system.
3. Press and release the
Mode
button until the FM mode is selected.
4. Press and release the
Tuning Up
or
Down
buttons to tune to a station.
The frequency will change in steps of 50kHz.
If the radio is tuned to a station of suf
fi
cient signal strength with RDS
information present, then the display may change to show the station
name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set
the
Volume
to the desired setting.
7. To switch off your sound system press and release the
On/Standby
button.
Note:
If you
fi
nd that FM reception is poor, try repositioning the telescopic
aerial. The aerial should be fully extended and positioned vertically for
optimum reception. If you
fi
nd that an FM broadcast has a lot of background
hiss, this may often be reduced by setting the radio into Mono reception
mode for the current FM station. Please refer to the section 'Stereo / Mono
setting - FM' on page 19 for further details.
2,7
3
4
4