If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
18
Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to
fi
nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. Press and release the
On/Standby
button to switch on your sound
system.
2. Press and release the
Mode
button until the FM mode is selected.
3. Press and release the
Menu
button. The FM menu will show on the
display.
4. Press and release the
Tuning Up
or
Down
buttons
until
'SCAN'
shows
on the display. Press and release the
Select
button.
5. Press and release the
Tuning Up
or
Down
buttons to switch between
'LOCAL' and 'DISTANT' options on the display. The Distant option will
allow the radio to
fi
nd weaker signals when scanning.
6. Press and release the
Select
button to con
fi
rm your selection. The
sound system will then revert to the normal information display. The
Local or Distant setting is stored in the radio and remains in force until
changed or until a System Reset.
Note:
The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.
4,5
4,5
3
4,6
2