7
Operating your radio - DAB
1. Carefully extend the telescopic aerial fully.
2. Press the
On/Standby
EXWWRQ WR VZLWFK RQ \RXU UDGLR :KHQ ¿UVW
switched on, the radio will be in DAB mode. After each use the radio
will remember the mode used and then switch on in that mode the
next time it is used. If the radio has been used before, the last used
station will be selected.
,IWKLVLVWKH¿UVWWLPHWKHUDGLRKDVEHHQXVHGDVFDQRIWKH%DQG,,,
DAB channels will be carried out (depending on whether scanning was
already completed in standby mode). During the scanning process
the display will show the progress of the station search. The number
on the right of the display is the number of stations that have been
found.
:KHQWKHVFDQLVFRPSOHWHGWKH¿UVWVWDWLRQLQQXPHULFDOSKDRUGHU
$=ZLOOEHVHOHFWHG7KH¿UVWVWDWLRQLQWKHOLVWRIVWDWLRQV
found during scanning will be played. The display will show the station
name.
5. If no signals are found then it may be necessary to relocate your radio
to a position giving better reception. You should then carry out a scan
WR¿QGQHZVWDWLRQVDVGHVFULEHGRQSDJH
•
Your radio has an indicator
on the display to indicate the strength
of the DAB radio signal being received.
Note
:KHQ¿UVWVZLWFKHGRQWKHUDGLRZLOOVHWWKHYROXPHWRDPRGHUDWHO\
high level, in case the broadcast is very quiet. After you have set the
volume, the radio will remember the setting that you have applied for the
next time that it is used.
DAB
