28
Headphone socket
A 3.5mm
Headphone Socket
located on the rear of your radio is provided
for use with either headphones or an earpiece. Inserting a plug automatically
mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We
therefore recommend setting the volume to a low level before connecting
headphones to the radio.
IMPORTANT:
Excessive sound pressure from earphones and headphones
can cause hearing loss.
Aux In
DC IN
9V
1A
OPEN
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
Auxiliary input socket
1. Connect a stereo or mono audio source (i.e. CD player, MP3 player,
etc.) to the
Auxiliary input
socket.
2. Press
On/Standby
to switch on the radio.
3. Press
Mode
until the display shows
'AUX IN'
.
4. Adjust
the
Volume
control on your player and on the radio for comfortable
listening.
5. Remove the cable from the
Auxiliary input
socket or press
Mode
to
cancel Auxiliary Input mode.
Note:
If the radio is in Auxiliary input mode with no input signal being
applied for more than 15 minutes then it will automatically switch to the
standby mode. If the radio is powered from the batteries the radio will
switch off completely. To use the radio again, simply press the On/Standby
button to switch it on.
Aux In
DC IN
9V
1A
OPEN
1
