10
DAB
Prune stations - DAB
If you move to a different part of the country, some of the stations which were
listed may no longer be available. Also, from time to time, some DAB services may
stop broadcasting, or may change location or frequency. Stations which cannot
be found, or which have not been received for a very long time are shown in the
station list with a question mark.
The Prune stations function will delete the marked DAB stations from your station list.
1. When in DAB mode, press
Menu
.
2. Rotate
Tuning
until
'PRUNE'
is displayed. Press
Tuning
.
3.
'PRUNE?'
will be displayed. Press
Tuning
to cause the invalid station names
to be removed from the station list.
4. If you do not wish to prune stations press
Menu
to exit.
Note:
If you have moved your radio to a different part of the country you should
DOVR FDUU\ RXW D VHDUFK IRU QHZ VWDWLRQV SOHDVH VHH WKH VHFWLRQ )LQGLQJ QHZ
stations' on page 8).
DAB
Operating your radio - FM
1. Carefully extend the telescopic aerial fully. Press
On/Standby
to switch
on the radio.
2. Press
Mode
until the '
FM'
mode is selected.
3. Rotate
Tuning
clockwise and then
apply a long press
on
Tuning
. Your radio
will scan in an upwards direction (low frequency to high frequency) and stop
DXWRPDWLFDOO\ZKHQLW¿QGVDVWDWLRQRIVXI¿FLHQWVWUHQJWK$IWHUDIHZVHFRQGV
the display will update. The display will show the frequency of the signal found.
If the signal is strong enough and there is RDS data present then the radio
will display the station name.
7RVFDQWKH)0EDQGLQDGRZQZDUGVGLUHFWLRQKLJKIUHTXHQF\WRORZIUHTXHQF\
rotate
Tuning
anti-clockwise and then
apply a long press
on
Tuning
.
$OWHUQDWLYHO\ WR VFDQ XVLQJ WKH )0 PHQX SUHVV
Menu
. The display will show
'SCAN'
. Press
Tuning
.
6. When the waveband end is reached your radio will recommence tuning from
the opposite waveband end. Adjust the
Volume
. To switch off your radio press
On/Standby
.
FM
FM