robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thellle phone: 33 (0)3.44.26.51.89 - fax: 33 (0)3.44.26.90.79 - www.robertjuliat.fr
Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.
VALID SINCE
: 25.06.01
40
DOSSIER TECHNIQUE
HMI PROFILE 1200W & 2500W
DocT
ech_900SNX_0601.ind
900 SNX
3. USING THE " DIGI " MODE.
"LAMP ON"
procedure.
3.1.The ballast and the CAD are on ;
the " lamp on" command is given ,
but the lamp does not switch on.
message displayed :
RJ LAMP LIGHTING
TRY FAILURE.
Return to 1.1 and follow the
procedure.
Green
LED
on.
No circuit number "lamp channel"
assigned : voir manual CAD :
- page 9.
Transmission Data error :
connection failure : check cable.
( refer to Tech. File p. 10 & 20 ).
Transmission Data error :
connection faulty or damaged -
check the wiring.
Important disruption on the Data
line : check the installation.
Bad Protocol : refer to page 7
- CAD 900 manuel.
Protocol recognition locked :
refer to page 15 - CAD 900
manual : The preferences .
Restart the
"LAMP ON"
procedure.
Green &
red LED
off.
3.2. Untimely extinction of the lamp.
message displayed :
LAMP FAILURE
CHECK SECURITY
Network cut off :
give the off command.
message unchanged.
Green
LED
on.
Green &
red LED
on.
Green
LED
on.
Green
LED
on.
Return to 1.1 and follow the
procedure.
Restart the
"LAMP ON"
procedure.
Restart the
"LAMP ON"
procedure.
Restart the
"LAMP ON"
procedure.
Restart the
"LAMP ON"
procedure.
Restart the
Restart the
"LAMP ON"
procedure.
message unchanged.
message unchanged.
message unchanged.
Summary of Contents for SNX 900 Series
Page 2: ...NOTES...
