robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thellle phone: 33 (0)3.44.26.51.89 - fax: 33 (0)3.44.26.90.79 - www.robertjuliat.fr
Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.
VALID SINCE
: 25.06.01
38
DOSSIER TECHNIQUE
HMI PROFILE 1200W & 2500W
DocT
ech_900SNX_0601.ind
900 SNX
message displayed :
LAMP OFF
CHECK SECURITY
Return to 1.1 and follow the
procedure.
message unchanged.
Network transient failure : give the
off command, or switch off
the mains for 30 sec.
1.2. Untimely extinction of the lamp.
2. USING THE " ANALOG " MODE
2.1. The ballast and the CAD are on ;
the" lamp on" command is given,
but the lamp does not switch on.
Check the analog command cable :
the command has not been
recieved.
( refer to Tech. File p. 10 & 20 )
message displayed :
RJ LAMP LIGHTING
TRY FAILURE
Return to 1.1 and follow the
procedure.
2.2. Intimely extinction of the lamp.
message displayed :
LAMP FAILURE
CHECK SECURITY
Command signal failure :
check the cable
( refer to Tech. File p. 10 & 20 )
Message in
start-up display :
" RJ LAMP OFF "
Restart the
"LAMP ON"
procedure.
Return to 1.1 and follow the
procedure.
message unchanged.
message unchanged.
Network transient failure : give the
off command, or switch off
the mains for 30 sec.
Restart the
"LAMP ON"
procedure.
Restart the
"LAMP ON"
procedure.
Restart the
"LAMP ON"
procedure.
Summary of Contents for SNX 900 Series
Page 2: ...NOTES...
