6
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Part no. 209-1381 rev. 02/8/21
Uplift Tech Cabinet
SECTION 2 - ELECTRICAL CONNECTIONS FOR ELECTRIC MODELS
Cabinet Connection -
No Door Light OR TUN Lighted Mirror
Cabinet Connection -
With Door Light and Programmable Night Light (where equipped)
120 VAC
20A GFI
120 VAC
20A GFI
Circuit Breaker
Circuit Breaker
Black (L)
Black (L)
White (N)
White (N)
Green (G)
Green (G)
Cabinet Power Circuit
Cabinet
Power
Circuit
Black (L)
Black (L)
Black (L)
Black (L)
White (N)
White (N)
White (N)
White (N)
Ground (G)
Ground (G)
Field Connection
Field Connection
Black (L)
Door
Light
Circuit
Black (L)
White (N)
White (N)
Wall Switch
Red (L)
6a
6b
NON-LIGHTED DOOR MIRROR
- Refer to diagram 6a
LIGHTED DOOR MIRROR
1. On-Mirror Control – [TUN]
(UCxx276RPTE4N)
2. Off-Mirror Control
(UCxx276RP3E2N or
UCxx276RP3E4N
MANUAL CONTROL NIGHTLIGHT
- Refer to diagram 6c (Overrides NL programming and operates via wall mounted switch)
7. Go to Section 4 for Final Assembly.
-Refer to diagram 6a, 6b or 6c
-Wall Switch- On/off switch only (as shown in diagram 6b and 6c)
- Refer to diagram 6b or 6c
- Wall Switch - On/Off switch OR dimmer (as shown in diagram 6b and 6c)
- Robern recommends the Maestro® C•L® Dimmer from LUTRON®,
Model # MACL-153M. (Other LED control dimmers may operate with this product
but have not been tested or verified. It's recommended that the dimmer be within
reach of your mirror so you can adjust the brightness.)
- http://www.lutron.com/TechnicalDocumentLibrary/369613a.pdf
