Robe Robin ProMotion ADM, User Manual

Page: 21 / 50

21
5.3 Personality
Pan Reverse - Use the item to invert pan movement.
Tilt Reverse - Use the item to invert tilt movement.
Pan/Tilt Mode - Use the menu to set mode of the pan/tilt movement.
Speed Mode - Both pan and tilt will move with the same speed as adjusted at the channel 5
"Pan/Tilt speed, Pan/Tilt time".
Time Mode – The pan and tilt will move with different speeds and they will come at
the same time to the end point of their tracks (pan and tilt use their optimal speeds).
Time of the pan/tilt movement (25.5 sec. max.) can be set by the channel "Pan/Tilt speed,
Pan/Tilt time".
Pan /Tilt Feedback . The menu item allows to return the mowing head to the required pan/tilt position after
changing the position by an external force if this option is set On.
Note. The Pan/Tilt Feedback should be permanent On, the option Off is not suitable for standard operation and
the head of the fixture can be damaged.
Blackout DMC - Set this option On if you wish to close light output during the time when the head goes to its
correct position, which has been changed by an external force.
Blackout While... - Use the menu if you wish to close the light output during effect changes.
Pan/Tilt Moving - If the item is On, the light output is closed during pan movement or tilt
movement.
Colour Mixing Mode - . The menu item allows you to switch colour channels into CMY or RGB mode.
Init Effect Positions - Use the menu to set all effects to the desired positions at which they will stay after
switching the fixture on without DMX signal received.
Display - This menu allows you to adjust the display behaviour.
Orientation - Use the function to rotate menu 180 degrees from current orientation.
ScreenSaver Delay - The item allows you to keep the screen on or to turn it off automatically
after 1-10 minutes after last touch of the screen.
Intensity - Use this function to adjust intensity of the display (0- min. intensity, 9- max. intensity)
LED Engine - Use the menu if you want to set special options for LEDs engine.
Ceiling Projection - This function enables to project image on a screen if the fixture
is suspended upside-down from the ceiling (truss) in front of the screen.
Rear Projection - The function enables to project the image to a rear projection screen if
the fixture is placed behind the screen.
Note that a special rear projection screen is required.
Colour Temperature - The function allows you to select a white colour from
the following whites: 3200K, 4200K, 5000K, 5500K, 5600K, 6500K, 7500K (default), 8000K,
9500K,
Maximum Brightness.
Gamma Curve - The menu item allows you to select a gamma curve from the following
curvatures: 1.8, 2.2 (default), 2.4, B&W, Linear.
Graphics Engine - use the menu if you want to set options for graphic engine.
Image Aspect Ratio -The menu offers two options:
Fill Screen - All pictures (videos) are displayed (played) on the whole screen regardless
of native aspect ratio of each picture (video).
Keep Aspect ratio - the fixture keeps native aspect ratio of played pictures (videos).
Edge Antialiasing -The function "smooths out" edges of the image during its rotation.
Gobo Selection Mode - The menu allows you to select from two options of media files
assigning to DMX values.
Alphabetical Order - The media files assigned to DMX values are sorted in
alphabetical order.
Numerical Order - The media files assigned to DMX values are sorted in
numerical order.
Default assigning is the alphabetical order.
Gobo Synchro Mode -The function switches on/off algorithm for synchronic switching gobos.