Robe Robin ProMotion ADM, User Manual

Page: 15 / 50

15
3.9. Wireless DMX operation
The wireless version of the fixture is equipped with the Lumen Radio CRMX module and antenna for receiving
DMX signal. CRMX module operates on the 2.4 GHz band.
To switch the fixture to the wireles DMX operation, select the option "Wireless DMX" from the menu "Receiving
Mode" (Fixture Address--> Receiving Mode--> Wireless DMX).
The option is also available in a DMX chart on the channel 6 (channel "Special functions", the range of 15-
19 DMX, the range of 10-14 DMX is designated for wired DMX). If DMX receiving option is changed by DMX
command, the change is permanently written into the fixture memory.
DMX range of 10-19 DMX of the channel "Special functions" switches fixture to the wired/wireless
operation and is active only during first 10 seconds after switching the fixture on.
After switching the fixture on, the fixture checks both modes of receiving DMX in the following order:
1. For the first five seconds, the fixture receives DMX signal from the wired input. If the channel "Special func -
tions" is set at some DMX input option, the fixture will receive DMX value according to this option. If DMX input
option is set to the wired input , this option is saved and checking procedure is finished. If DMX input option is
not set, the fixture continues next 5 seconds in scanning wireless DMX signal-see point 2.
2. For the next 5 seconds the fixture receives wireless DMX signal and again detects if the Special functions
channel is set at some DMX input option, if not, the fixture will take option which is set in the fixture menu
"Receiving mode".