8
Rigging via two omega holders:
1
-Clamp
2
-Omega holders with quarter-turn loks
3
-Truss
4
- Safety wire
5
-Attachment point for safety wire
When installing fixtures side-by-side, avoid illuminating one fixture with
another!
3.3 Positioning the Robin ProMotion
The Robin ProMotion is designed to be installed in one of four possible installation locations:
1. Front Table - the fixture is placed near the floor in front of the screen.
2. Front Ceiling - the fixture is suspended upside-down from the ceiling (truss) in front of the screen.
Set Ceiling Projection at On in the menu Personality ("Personality--->"LED Engine" --->"Ceiling Projection"---
>"On").
3. Rear Table - the fixture is placed near the floor behind the screen. Set Rear Projection at On in the menu
Personality ("Personality--->"LED Engine" --->"Rear Projection "--->"On")
Note that a special rear projection screen is required.
4. Rear Ceiling - the fixture is suspended upside-down from the ceiling (truss) behind the screen.
Set Rear Projection in the menu Personality ("Personality--->"LED Engine" --->"Ceiling Projection"--->"On") and
Ceiling Projection at On ("Personality--->"LED Engine" --->"Rear Projection"--->"On")
Note that a special rear projection screen is required.
When determining the position of the fixture and projection screen, you will need to account for the projected
image size, which is directly proportional to the projection distance.
Summary of Contents for Robin ProMotion ADM
Page 1: ...1 Version 1 7 ...
Page 50: ...40 ...
