Robe ROBIN colorstrobe lite User Manual Download Page 23

Page: 23 / 50

Edit Program

- Use the menu to create or to edit desired program. The Robin ColorStrobe Lite offers 3 free

programs, each up to 88 steps.

Edit Program 1

- The option allows to edit user program No.1.

Edit Program 2

- The option allows to edit user program No.2.

Edit Program 3

- The option allows to edit user program No.3

To edit program:

1. Touch the item which you want to edit (“Edit Program 1” - “Edit Program 3”).

2. Touch the item "Edit Program Steps".

3. Touch the item "Step 1".

4 From the list of effects touch desired effect and set its value. Browse throw the list by touching the [up arrow]

and [down arrow] and set all desired effects.

An item "Step Time" (value of 0-25.5 sec.) is the time during which effects last in the current step

5. Save adjusted effects to the current step by touching the [confirm] or save and copy them to the following

step by touching the [copy]. By touching the text box "Preview" next to the current program step you

can view created scene.

6. Repeat the steps 4 and 5 for next program steps.

7. After editing desired program steps, adjust the length of the program by touching the text boxes "Start Step"

and "End Step".

Meaning of the icons used in the "Edit Program" menu:

- moves down on the next page

- saves adjusted values and leaves menu

- moves up on the previous page

- saves values to the current step and copy them to the

following prog. step

- leaves menu without saving values

7.6 Tab "Service"

Adjust DMX Values

- The menu allows you to set all effects to desired positions before colour calibration of

the fixture.

Calibrations

Calibrate Colours

- The menu serves for adjusting of LED saturations to achieve colour temperature of

5600K for white output.

Red

- a red LEDs saturation adjustment

Green

- a green LEDs saturation adjusment

Blue

- a blue LEDs saturation adjustment

White

- a white LEDs saturation adjustment

Calibration of the white 5600K via the control board

1. Disconnect DMX controller from the fixture. Set the menu item "Colour Calibration Mode" to On

(tab Personality-> Colour Calibration Mode-> On) and go to the "Adjust DMX Values" menu

(tab Service-> Adjust DMX Values).

2. Set "Intensity foreground", "Duration" and "Rate" at 255 DMX and "Virtual colour wheel" at 10 DMX (white

5600K).

3. Point the centre of the light beam on the lux meter (e.g. Minolta CL-200A Chroma meter) which is placed

at min. distance of 2.5m from the fixture

4. Enter the menu "Calibrate Colours".

5. By means of the Red, green, Blue and White items adjust the 5600K colour temperature as exactly as

possible (∆u´v´= 0).

7. After adjusting 5600K colour temperature, touch the [confirm] to save all adjusted values.

Note: you can also use DMX controler for this calibration, calibration protocol is the following:

Summary of Contents for ROBIN colorstrobe lite



















































Search results

Summary of Contents for ROBIN colorstrobe lite

Reviews:

Related manuals for ROBIN colorstrobe lite

Brands by name

Popular brands

Robe ROBIN colorstrobe lite, User Manual

Search results

Summary of Contents for ROBIN colorstrobe lite

Reviews:

Related manuals for ROBIN colorstrobe lite

Brands by name

Popular brands