Robe ROBIN colorstrobe lite User Manual Download Page 24

Page: 24 / 50

Effect

Mode 1

Red - red saturation

channel 10

Green- green saturation

channel 11

Blue - blue saturation

channel 12

White - white saturation

channel 13

Load Default Calibrations

- The item loads default (factory) calibration values.

Updating software

- The menu item allows you to update software in the fixture via either serial or USB port

of PC.

The following are required in order to update software:

- PC running Windows 95/98/2000/XP/7/8 or Linux

- DMX Software Uploader

- Flash cable RS232/DMX No.13050624 (if you want to use a serial port of PC)

- Robe Universal Interface (if you want to use an USB port of PC)

Note: Software update should execute a qualified person. If you lack qualification, do not attempt the

update yourself and ask for help your ROBE distributor.

DMX address, IP address, programs 1-3 and all items in the menu "Personality" will be set to their default

(factory) values.

To update software in the fixture:

I. Installation of the DMX Software Uploader.

1. DMX Software Uploader program is available from the ROBE web site at WWW.robe.cz.

2. Make a new directory ( e.g. Robe_Uploader) on your hard disk and download the software to it.

3. Unpack the seftware.

II.Fixture software updating.

1.Determine which of your ports is available on your PC and connect it:

- with the DMX input of the fixture if you using the flash cable RS232/DMX

- with the DMX output of the Robe Universal Interface if you using the USB cable.

Disconnect the fixture from the other fixtures in a DMX chain. Turn both the computer and

the fixture on. Make sure the lamp is switched off (only if the fixture involves a lamp).

2. Switch the fixture to the updating mode by touching the "Updating Software " item

Note: If you do not want to continue in software update, you have to switch off and on the fixture

to escape from this menu.

We recommend to cancel all running programs before starting the Software Uploader.

3. Run the Software Uploader program. Select desired COM and then click on the Connect button.

(Select COM if the serial port is used or Robe Universal Interface if the USB port is used).

If the connection is OK, click on the “Start Uploading button“ to start uploading. It will take several

minutes to perform software update.

If the option "Incremental Update" is not checked, all processors will be updated (including

processors with the same software version).

If you wish to update only later versions of processors, check the “Incremental Update box“.

Avoid interrupting the process. Update status is being displayed in the Info Box window.

When the update is finished, the line with the text “The fixture is successfully updated“ will appear in

this window and the fixture will reset with the new software.

Note: In the case of an interruption of the upload process (e.g. power cut), the fixture keeps the updating mode

and you have to repeat the software update again.

Summary of Contents for ROBIN colorstrobe lite



















































Search results

Summary of Contents for ROBIN colorstrobe lite

Reviews:

Related manuals for ROBIN colorstrobe lite

Brands by name

Popular brands

Robe ROBIN colorstrobe lite, User Manual

Search results

Summary of Contents for ROBIN colorstrobe lite

Reviews:

Related manuals for ROBIN colorstrobe lite

Brands by name

Popular brands