30
To get access to the fixture´s inside
1. Unscrew three screws (1) along both sides of the rear cover (2).
2. Disconnect cables between rear cover and inside of the fixture (power, display, DMX).
3. Unscrew two screws (3) at each side of the chassis with power supply (4) and pull the chassis out
with care.
4. Now you can clear inside of the fixture including fans (5).
12.1 Replacing fuse
Only replace the fuse by a fuse of the same type and rating.
Before replacing the fuse, unplug mains lead!
1) Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing
(anti-clockwise).
2) Remove the old fuse from the fuse holder.
3) Install the new fuse in the fuse holder (only the same type and rating).
4) Replace the fuse holder in the housing and fix it.
12.2 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local
regulations and codes.
January 23, 2018
Copyright © 2016-2018 Robe Lighting - All rights reserved
Specifications are subject to change without notice.
Made in ROBE Lighting s.r.o., Palackého 416, 757 01 Valašské Meziříčí, Czech Republic
Summary of Contents for ROBIN colorstrobe lite
Page 1: ...1 Version 1 1 ...
Page 50: ...31 ...
