Robe ROBIN colorstrobe lite User Manual Download Page 4

Page: 4 / 50

immediately. The arising condensation water might damage your device. Leave the device switched off until

it has reached room temperature.

Do not shake the fixture. Avoid brute force when installing or operating the fixture.

When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat, moisture

or dust.

Air vents and slots in the fixture are provided for ventilation, to ensure reliable operation of the device and to

protect it from overheating.The openings should never be covered with cloth or other materials, and never

must be blocked.

This fixture should not be placed in a built-in installation unless proper ventilation is provided.

Never place filters or other materials over the front glass cover.

Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.

To avoid damage of the internal optical system of the fixture, never let the sunlight

lights directly to the lens array, even when the fixture is not working !

Keep flammable materials well away from the fixture.

Do not illuminate surfaces within 1 meter of the fixture.

Provide a minimum clearance of 0.3 meters around air vents

Always use a secondary safety cable when rigging this fixture.

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.

The fixture becomes very hot during operation. Allow the fixture to cool approximately 20 minutes prior to ma

nipulate with it.

Operate the fixture only after having familiarized with its functions. Do not permit operation by persons not

qualified for operating the fixture. Most damages are the result of unprofessional operation!

Please use the original packaging if the fixture is to be transported.

Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short

-circuit, burns, electric shock, crash etc.

Summary of Contents for ROBIN colorstrobe lite



















































Search results

Summary of Contents for ROBIN colorstrobe lite

Reviews:

Related manuals for ROBIN colorstrobe lite

Brands by name

Popular brands

Robe ROBIN colorstrobe lite, User Manual

Search results

Summary of Contents for ROBIN colorstrobe lite

Reviews:

Related manuals for ROBIN colorstrobe lite

Brands by name

Popular brands