Robe ROBIN colorstrobe lite User Manual Download Page 8

Page: 8 / 50

3.3 Rigging the fixture and floor installation of the fixture

A structure intended for installation of the fixture (s) must safely hold weight of the fixture(s) placed on it. The

structure has to be certificated to the purpose.

The fixture (fixtures) must be installed in accordance with national and local electrical and construction codes

and regulation..

For overhead installation, the fixture must be always secured with a safety wire

that can bear at least 10 times the weight of the fixture.

When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,

under high working places and other endangered areas is forbidden.

The operator has to make sure that safety-relating and machine-technical installations are approved by an

expert before taking into operation for the first time and after changes before taking into operation another time.

The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled

person once a year.

Allow the fixture to cool for ten minutes before handling.

The fixture should be installed outside areas where persons may walk by or be seated.

IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working

load limits, installation material being used, and periodic safety inspection of all installation material and the

projector. If you lack these qualifications, do not attempt the installation yourself, but use a help of professional

companies.

CAUTION: Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety

of a possible installation, do not install the fixture!

The fixture has to be installed out of the reach of public.

The fixture must never be fixed swinging freely in the room.

When installing the device, make sure there is no highly inflammable

material (decoration articles, etc.) in a distance of min. 0.5 m.

CAUTION!

Use an appropriate clamp to rig the fixture on the truss.

Follow the instructions mentioned at the bottom of the fixture base.

Make sure that the device is fixed properly! Ensure that the

structure (truss) to which you are attaching the fixture is secure.

The fixture can be rigged to the truss via the Omega holder and one clamp (two holes with 140mm spacing

serves for the Omega holder) or stand directly on the floor.

Summary of Contents for ROBIN colorstrobe lite



















































Search results

Summary of Contents for ROBIN colorstrobe lite

Reviews:

Related manuals for ROBIN colorstrobe lite

Brands by name

Popular brands

Robe ROBIN colorstrobe lite, User Manual

Search results

Summary of Contents for ROBIN colorstrobe lite

Reviews:

Related manuals for ROBIN colorstrobe lite

Brands by name

Popular brands