Robe redwash 3-192, User Manual

Page: 27 / 27

REDWash 3•192
27
11. Cleaning and maintenance
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke ‐ fluid residues must not build up
on or within the fixture. Otherwise, the fixture‘s light ‐ output will be significantly reduced. Regular cleaning will not
only ensure the maximum light ‐ output, but will also allow the fixture to function reliably throughout its life.
A soft lint ‐ free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances should
alcohol or solvents be used!
DANGER !
Disconnect from the mains before starting any cleaning or maintenance work
The glass holder and lens modules will require weekly cleaning as smoke ‐ fluid tends to building up residues,
reducing the light ‐ output very quickly. The cooling fans should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum ‐ cleaner or an air ‐ jet.
More complicated maintenance and service operations are only to be carried out by authorized distributors.
11.1 Replacing the main fuse.
Only replace the fuse by the one of the same type and rating.
To replace the fuse.
1. Disconnect the fixture from mains.
2. Unscrew the fuse holder on the rear panel of the base with a fitting screwdriver from the housing
(anti clockwise).
3. Remove the old fuse from the fuse holder.
4. Install the new fuse in the fuse holder.
5. Replace the fuse holder in the housing and screw it.
11.2 Replacing the air filters
The REDWash 3•192 is supplied with 2 air filters placed in the fixture head. Clean the air filters with a vacuum
cleaner or you can wash them and put back dry.
To replace the air filters.
1. Disconnect the fixture from mains.
2. Raise up a filter cover (1) (fastened with two magnets)
on the top head cover.
3. Pull out the air filter (2).
4. Clean or replace the air filter.
5. Snap the filter cover back to the head cover.
6. Repeat steps 2 ‐ 5 for the bottom cover.
7. Reset the item "Elapsed Time“ in the "Fixture
Information" (Fixture Information
Æ
Air
Filters
Æ
Elapsed Time).
Specifications are subject to change without notice.
March 5, 2009