background image

37

11. Technical specifications

Power supply:

Magnetic ballast:

Voltage:..............................208/230/250V AC, 50/60Hz ~
Main fuses: Live fuse:........T10A@230V

Neutral fuse:....T10A@230V

Electronic ballast: Voltage:..............................100/120/208/230/250V AC, 50/60Hz ~

Main fuses: Live fuse:........T10A@230V

Neutral fuse:....T10A@230V
Live fuse:........T20A@120V
Neutral fuse:....T20A@120V

Power consumption:............1600 VA

Lamp:

Philips MSR 1200 SA,base:GY22,colour temperature:5600 K,average lamp life:750 h

Optical System:

- High luminous-efficiency parabolic reflector
- Focus lens and multistep zoom lenses system
- Beam angle:13°- 42°
- All lenses are anti-reflection coated

CMY-colours mixing module

 - Smooth CMY colour mixing system
 - Colour temperature correction filtre lowers the colour temperature from 5600K to 3200 K
- 63 colour macros

Colour wheel

- 4 dichroic filters,UV filter,6000K temp.filter  plus white
- Colour wheel with variable rotation speed in both directions
- All colour-modules are interchangeable
- Random colour selection by audio control
- Auto random colour selection

Rotating gobo wheel 1

- 6 replaceable dichroic glass gobos plus an open position  rotating in both directions at different
  speeds
- Fine gobo indexing and rotation
- Rotating gobo- wheel cont. rotation
- Shaking gobos with variable speed
- Random gobo selection by audio
- Auto random gobo selection
- Dichroic glass gobos:outside diameter= 37.3 mm, image diameter =31.5 mm,high
  temperature borofloat or better glass,thickness=1.1mm up to 5 mm ,coating:dichroic or enhanced
  aluminium

Rotating gobo wheel 2

- 6 replaceable gobos (1glass gobo,5 dicroic glass gobos plus an open position) rotating in both
   directions at different speeds
- Fine gobo indexing and rotation
- Rotating gobo- wheel cont. rotation
- Shaking gobos with variable speed
- Random gobo selection by audio
- Auto random gobo selection
- Rotating gobo- wheel cont. rotation
- Dichroic glass gobos:outside diameter= 37.3 mm, maximum image diameter =31.5 mm,high
  temperature  borofloat or better glass,thickness=1.1mm up to 5mm ,coating:dichroic or enhanced
  aluminium
- Glass gobos:outside diameter= 37 mm,high temperature borofloat or better
  glass,thickness=1.1mm up to 5 mm ,coating:dichroic or enhanced aluminium

Summary of Contents for Color Spot 1200 AT












































Reviews: