ENGLISH
16
INSTRUCTIONS AND USER MANUAL
1. ASSEMBLY OF THE TAILPLANE:
Position the tailplane as shown in the
illustration at the fuselage end and screw
it tightly to the fuselage from above using
the M4x25 screw. Make sure that the screw
is firmly seated and do not overtighten the
screw!
PNP
Motor
Brushless 2820 1.000KV (included)
ESC
Brushless 30A 2-3S Lipo , 5V/2A BEC (included)
Battery
Lipo approx. 2200 mAh 3S/11,1 Volt (not included)
Servo ELE
1x 9g (included)
Servo RUD
1x 9g (included)
Servo AILE
2x 9g (included)
Propeller
10x8“ (included)
Charger
suitable Lipo charger (not included)
TX
min. 4 channels (not included)
RX
min. 4 channels (not included)
SPARE PARTS
Spare Part
item Number
301403
Wingset with decals (w/o Servos)
301404
Fuselage with decals (w/o electronic)
301405
Tail unit set
301406
Canopy
301407
Prop blades
301408
Foldingprop set
301409
Pushrod set
301410
Winglets
301411
Decals
301412
Brushless Motor 2820
8713
Brushless controller ro-Control 40A
S0009
Rovor S0009 9g servo
BOX CONTENT / NEEDED ACCESSORIES
