3.
THE CONTROLS
3.1
USING THE CONTROLS
The four buttons on the Power Peak FUN are used to trigger different actions according
to the operating mode you have set.
MODE button
The ‘MODE’ button is used to select the process you wish to use: CHARGE, DISCHAR-
GE or 1 / 3 x DISCHARGE -> CHARGE. Pressing the ‘MODE’ button also interrupts any
process which is already running.
SELECT button
Pressing the ‘SELECT’ button carries out the menu selection, and calls up the individual
screen displays.
SET buttons
The ‘SET’ buttons are used to adjust the charge and discharge parameters. Pressing the
‘INC’ button increases the value in question, while the ‘DEC’ button reduces it. The but-
tons are also used to change settings within menus.
The unit features a switchable Piezo buzzer which - if activated - provides an audible con-
firmation of every button-press, the end of the charge or discharge process, and any error
which might occur.
All buttons feature an auto-repeat function, i.e. holding the button pressed in has the
same effect as pressing the button repeatedly.
Operating instructions
POWER PEAK FUN
Order No.
8467
26
Screen
BID socket
MODE button
SELECT
button
Power
supply
lead
SET
buttons
Battery output
sockets
