Notice Items
1. Please make sure the source of gas is in line with that noted
on nameplate before your installation of the product, otherwise
it is strictly prohibited to use.
2. The minimum distance between the gas stove and gas
resource should be no less than 1 meter and connecting tube
should be the matched special gas tube, which should be
replaced once a year at a regular limitation. The regular length
of the tube should be 1-1.5 meter as preferred. It is highly
required that the tube should be avoided from pressing, heavy
bending or aging. The joining point should be carefully checked
to avoid any possibility of leaking and any potential damage
from the leaking.
4. The fixing metal joint should be installed strictly according to
the operation manual, which lays in the “package of the fixing
metal joint” or installed by the professional staff, if the tube is
connected by the fixing metal joint. The test of leaking should
be done before use. (The way of leaking test above is for your
reference ).
5. The gas stove should be installed on the place of well-
ventilated, but should be avoided from the strong wind.
6. Do not try to cover the flame on the gas stove, or put
anything tinder around. Besides the gas stove cannot be used
to for drying towel or clothes, etc.
7. Do not have the immediate touch on the flame-around area,
such as work stand, burner or cooktop after the use of the gas
stove.
8. Do not try to beat the cooktop, and the special attention
should be paid to keeping the gas stove in good condition
during the transport and installation.
9. Once any leaking tested, the valve should be turned off
immediately and the window should be open to keep ventilated.
The electric fan or range hood or any other electric appliances
are prohibited to use, and keep the fire away. Meanwhile,
please contact professional staff.
10. If there were any abnormal sound such as whir heard, or the
color of flame turned from dark to light or turned muddy, the
backfire from the burner might be happened. Please turn off the
switch, and check whether the burner and copper core are well-
positioned. Turn on the switch in half a minute after the check.
1
2
Gas Hob
Gas Hob
3. Leave the valve of the gas inflow tube under normal situation.
The leaking test should be done after any abnormal change of
the valve. (Put the low-concentrated cleaning solution to the
joint point and then turn on the valve to check whether any air
bubble appears, if there were any air bubble, the valve should
be turned off immediately and fix the problem. It cannot be used
until the problem is completely solved).
WARNING: THE GAS STOVE SHOULD BE ONLY
CONNECTED BY THE QUALIFIED SPECIAL TUBE(e.g. the
tube made of UV-PSA, Buna-N rubber ). IT IS HIGHLY
PROHIBITED FROM USING NORMAL RUBBER TUBE, FOR
THE POSSIBLE CHEMICAL REACTION MAY HAPPEN WHEN
THE NORMAL RUBBER TUBE MEET OZONE/LIQUID OIL,
WHICH WILL POSSIBLY CAUSE THE DAMAGE OF THE
TUBE AND THE RELATED POTENTIAL ACCIDENTS.
