Gas Hob
Gas Hob
Product Parameter
7
8
Note:
1. Parameters indicate for reference only. The exact datas should be confirmed on
the nameplate on the gas hob.
2. The installation size of built-in gas hob should be confirmed by the specification on
the templet in the carton.
3. We keep right to alter design or specification.
Installation Instruction
1. When the Gas Hob is installed, the distance from the combustibles is not less than
15cm, and the distance between the Gas Hob and noncombustible should be not
less than 7 cm; The Gas Hob and the above object should have a height of more
than 100cm, If you want to install a Rang Hood, the height of 65-75cm from the Gas
Hob is suitable. (This space is set up according to the installation requirements of the
Range Hood).
2. The kitchen cabinet for built-in gas stove should be specially designed for the
safety concern. The ventilated borehole should be suitable for the safety requirement
2
and the size should be no less than 100 cm .
3. When the special gas tube is used, one side of the tube should be connected with
the gas valve while the other side connected with the inflow side of gas stove. Please
take off the cover on the connection point and put the tube to cover the red-mark
point, and tighten it with the anchor ear. Be sure that the leaking test should be taken
before use.
4. The size of the borehole should be taken according to the requirement, and put the
built-in gas stove to match the borehole.
5. If the G1/2
”
inch connector is used, please make sure to put the rubber gasket
inside the connector and the leaking test should be taken before use.
6. The qualified reduction valve should be used when the LPG is used as the source
of the gas.
Requirement for hole size
Item Name
Model
Gas
Category
,
type
Gas inlet connection
Product
Size
(
mm
)
Hob Element Number
Air in flow
Panel
Ignition Method
Flame failure safety
device
Gas Hob
780
×
450
×
130
12.4
2
Full
Tempered Glass
650
×
350
×
R10
Electronic Pulse
Yes
28-30 mbar
Net Weight(kg)
Size Of Opennings(mm)
Total: 10.0kW (728g/h)
Left burner: 5.0kW (364g/h)
Right burner: 5.0 kW (364g/h)
I
3B/P(30), G30, G31 or their mixtures
Injector Dia. (mm)
0.95 & 0.45
JZY-B272
φ
9.5mm special gas rubber gasket
(G1/2 inch special metal gasket)
”
Rated gas pressure
Nominal heat input
Hoop
Red thread
Hose connector
Rubber hose
Gas inlet of stove
Rubber washer
Metal corrugated pipe
Rubber washer
Front valve
Rubber hose diagram
A schematic diagram of a metal bellows