Contents
---------- --- ----------- ----- --- ----- --- --- ------
- ----- ----- - -- - ---- - -- - -- --- ---
----- ---------- -------- - -- - ---- - -- - -- --- ---
------- ------ ----- ----- - -- - ---- - -- - -- --- ---
----- ---------- -------- - -- - ---- - -- - -- --- ---
------ ------ ----- ----- - -- - ---- - -- - -- --- ---
--- ----------- ----- --- ----- --- --- ------
- ------- ---------- -------- - -- - ---- - -- - -- --- ---
---------- ----- --- ----- --- --- ------
----- ----------- -- - ---- - -- - -- --- ---
- -- -- - -------------- ----------- -- - ---- - -- - -- --- ---
1
3
5
6
6
7
8
10
12
13
13
Notice Items
Important
Safety
Information
Product Overview
Product Structure
Product Features
Product Parameter
Installation Instruction
Use Instruction
Clean
and
Maintenance
General
Troubleshooting
Attachment
Problem
Ignition
Failure
The burner is
not work
when loosen
the knob
Gas leakage
(gas smell)
Possible Reason
Gas Volve is not open
Air exists in gas pipe
The rubber tube is
twisted or blocked
Electrode needle is dirty
lgnitor malfunction or the electrode
needle in wrong position
Without battery,put battery
oppositely or power insufficiency.
The copper core,copper cover,
burner is in wrong position
Time to press On/Off switch
is too short.
Switch is not closed completely.
The rubber tube is not
connected or cracked.
Burner is blocked
The gas used here is not consonant
with the required in the nameplate.
Gas pressure is unstable,
water in the rubber tube.
Measurement
Turn off the control switch
Then turn on the gas valve
Exhaust the air by igniting repeatedly
Straighten,clean or replaced
the rubber tube
Clean clear
Adjust the electrode needle to burner,
keep the distance3.5-4mm
Install the battery collectly
or replace the battery
Install the copper core,copper
cover,burner in right position
Keep the switch down 3-5
seconds then loosen
Turn off the switch
Connect rubber tube or replace it
Choose the cooktop properly
Get rid of water in the rubber tube
Burning
abnormal
or sounding
noise
Clear away the block
General
Troubleshooting
Attachment
1. One copy of the Operation Manual
2. Two pieces of anchor ear (except for metal soft pipe)
3. One copy of Installation templet
4. One piece of battery in the packing foam
13
Gas Hob