Page
16
of
26
14.
Displays the next scheduled contact that your Bike Trac will make with the Bike Trac servers (this is in
order to update its position and offers peace of mind that the unit is working).
15.
Displays the current operating setting of your Bike Trac unit. I.e. armed, disarmed etc.
16.
Displays the alarm activation setting. I.e. the trigger you have chosen for Bike Trac to alarm –
Movement or Security Fence
17.
Allows you to change the Security Fence settings (only available on 2 wire install). Security fence is the
area you set that if your bike moves outside of this ‘area’, the system will alert you that your bike has
been stolen (Recommended is Movement. 15 seconds of continuous movement)
18.
Allows you to add or edit those people who will receive an alert (by email or SMS text message) if your
Bike Trac system is triggered (maximum of three contacts for SMS alerts)
19.
Indicates your bike’s position on the map. Hover over this icon to display Bike Trac options for that
bike
20.
Indicates the number of bikes being monitored on your Bike Trac portal
21.
Indicates the number of pre-defined Security Fences you have set-up (i.e. work, home etc). These can
be added, deleted or edited as outlined under number 17 above (only available on 2 wire install)
22.
This icon indicates if your bike’s ignition is on or off. Green indicates on, red indicates off. For 2 wire
installations, this icon will stay green permanently
23.
Allows you to refresh your bike(s) status on the system. This refreshes automatically every 2-3 minutes
24.
This indicates if your Bike Trac unit is armed or disarmed. This icon will change to a bell shape if the
alarm for that bike has been activated and the bike is now in ‘tracking’ mode
25.
Small thunder cloud with bolt of lighting means that the unit does not have GPS at that point, could be
the bike is in a garage or underground car park.
26.
If an Alarm Bell has appeared in replace of the Shield, the unit is in alert mode
Logging in to your Bike Trac Portal
To log into your Bike Trac tracking portal, go to
www.roadangelgroup.com
. Please follow the prompts to
either login or register your Bike Trac product. Figure 1.1 shows the Road Angel Group website
(
www.roadangelgroup.com
) homepage, with the account login to the bottom left.
Once you have successfully logged-in or registered, you will be directed to your account homepage. On
your account homepage details of your Bike Trac product will be shown, including a link to ‘launch tracking
portal’. Click on this link and this will open up your Bike Trac portal.
