RMG TERZ 94, Operating Instructions Manual

Page: 28 / 66

Operation
26
Operating Instructions for the TERZ 94 Electronic Turbine Meter
Programming with the programming module is to be performed in the same
way as with the buttons..The external and internal buttons correspond to each
other in the following way:
Int. button Ext. button Meaning
P P Display mode:
Switch over to programming mode
(Press the button longer than 2 seconds)
Programming mode:
Set the decimal point.
+
∧
Display mode:
Switch over to the next higher level.
Programming mode:
- Increase the decimal by 1.
- Scroll in the list.
(Value identified with “L“)
-
∨
Display mode:
Switch over to the next lower level.
Programming mode:
- Decrease the decimal by 1.
- Scroll in the list.
(Value identified with “L“)
|
→
|
→
Display mode:
Short-time view of the coordinate (e.g. A01)
Programming mode:
Go to the right by one decimal place (if the last
decimal has been reached: Quit programming
mode).