Loading a preset cannot be undone. Ensure that any important configuration has been
saved to another preset before proceeding.
The device name is part of the preset. When a preset is loaded, the device name is changed
to the value stored in the preset.
To load a preset on the device:
1. Open the
preset
tab in the
STATE
section
(see: Section 2.3, “Use of the Display and Encoder”
).
2. Move the cursor to the current preset number and push the encoder.
3. Rotate the encoder to choose a preset, and confirm by pushing the encoder.
4. Select
Load
to load the preset.
To load a preset using the web remote:
1. Locate the
preset
tab
2. Use the drop-down menu
to select a preset.
3. Press the
Load
Button
.
8.2.3. Loading Factory Default Settings
The factory default settings are saved internally as
Factory Preset
and cannot be overwritten.
To load the factory defaults, load the 16th preset labelled
Factory Preset
.
Loading the factory defaults does not delete any saved presets. It also does not affect the
lock
settings in the
STATE
section.
8.3. Device Lock
The M-32 DA Pro can be secured against both accidental and intentional changes to its configuration.
Locking
the device, with or without code, protects against changes on the device itself. When locked, the
display shows a lock symbol.
The device lock does not protect against changes over network or MIDI remote control protocols. The
lock configuration is not stored within a
preset
.
A four to six digit code can be configured on the device. If this code is lost or forgotten, it is
not possible for the user to unlock the device. Contact your support for assistance.
8.3.1. Locking the Device
RME M-32 DA Pro User’s Guide
8.3. Device Lock |
28
